Using the new sensor developed by kayer personnel, you will be able to disconnect or connect the input or output power of the equipment according to the specific conditions.
This sensor is the first example of its kind, and all stages of its construction and design are implemented by the company's technical team and completely customizable.
This device enables connectivity with temperature/humidity sensors or detects leakage of water.
Under this condition, the sensor takes the input and output ports to active or inactive other sensors.
- Connecting to the temperature and humidity sensor and reading the sensor's data. By defining the scope of these parameters, the device automatically switches off the input or output current. The device receives the temperature and humidity from the relevant sensor every 10 seconds and checks the received values with the specified limits if it exceeds the specified limit, it will disconnect or connect the current (power outage equipment Avoid damaging and activating the backup cooling system (by normalizing the conditions), and returning to the permitted system limits.
- Connecting to the water leakage sensor and reading the sensor's data. In case of leakage, the device automatically switches off the input or output current. (Power outages is to prevent equipment damage and making siren to go off)
- Receiving information from network monitoring software: If the device is connected to a kayer monitoring system, if the conditions or combination of conditions occurs, the system can give the device a command for disconnecting or connecting power supply ports. For example, if the connection of the monitoring software with the wireless radio is disconnected (hang up), sending the control command to this device will cut off the power of the radio and reconnect it.
- Disconnecting the input and output ports on a specified time: You can interrupt or connect the ports within 24 hours. For example, activating the backup cooling system during hot summer days